Description
Single and double acting MHP pump for cab tilting systems
The hydraulic hand pump MHP is designed for cabin tilting systems on the Iveco truck lines, however it is suitable and mostly applicable in the Aftermarket. These are the main fields of applications:
- Livestock and Agriculture: trailer bodies, lifting forks
- Industry: guide presses, rotary tables, tank overvoltage, single and double acting cylinder drives
- Transport: small hydraulic cranes, trucks, cabin tilting, concrete mixers.
Compact design and low weight, these pumps can reach a working pressure up to 420 bar and they are very resistant to the corrosion of the atmospheric agents.
MHP: hand hydraulic pump for cab tilting systems: main features
Manual operation- Compact design
- Working pressure up to 420bar
- Adjustable relief valve
- 440 & 580 cm3 oil tanks
- Temperature range -40°C +80°C
- Oil flow 4cm3/stroke
- Resistance to corrosion and atmospheric agents
- Oil fill and level control cap
- <weight 2,5Kg
MHP: Single and double acting pump for cab tilting systems: technical features:
| Valve tyep: | Manual |
| Max working pressure (bar): | 420 |
| Cylinder compatibility | Single/Double effect |
| Working temperature (°C): | Min – 30 |
| -40 (only with UNIVIS HVI 13/26) | |
| Max std + 80 | |
| Max relief valve setting (bar): | 280 |
| Oil capacity (cm3): | 440/580 |
| Oil flow/Stroke (cm3): | 4 ±10% |
| Check valve: | 2/4 vie |
| Paint: | grigio IC444 IS 18-1600 |
| Weight (kg): | ≈ 2,5 |
Size
Series comparison
All BELL products are designed and manufactured within BELL SRL in via F. De Pisis, 5 – 42124 Reggio Emilia (RE) – Italy, according to the Quality Standards that distinguish the MADE IN ITALY from the Rest of the World.